How To Safely Use A Baby Monitor
The optimum usage of a baby monitor may be achieved by installing it in the safest location possible, from where you can see your child from the best vantage point. In order to keep an eye on their children, parents may greatly benefit from baby monitors, and video monitors in particular. While you’re doing other chores around the home, check on your infant to make sure he or she is sleeping well.
However, you should use extreme caution in installing or using a baby monitor in your child’s bedroom.
Each of the best 2 camera baby monitor on our list consists of a parent unit (or a smartphone) and a baby unit (often a camera with a microphone). Careful handling of the infant unit is essential.
Especially with electromagnetic radiation and possible privacy invasions, there are critical health and safety concerns to be aware of.
Things To Consider: How And Where To Properly Place A Baby Monitor
To choose the optimal location for your video baby monitor in your nursery, you should take into account the following aspects as you make your plans:
Concerns about People’s Safety
Baby Camera Placement: Health and Safety
If you’re using a radio-video camera as a baby monitor, keep it at least 6 feet (1.8 metres) from your youngster. It is suggested that people keep at least this distance away from sources of electromagnetic radiation.
Digital cordless baby monitors have been studied and shown to generate almost the same amount of radiation as a mobile phone tower 500 feet (150 m) distant when put less than 3.2 feet (1 m) from a baby’s cot.
It’s also important to be cautious if your video monitor has a power cord, since strangulation might result from accidentally pulling on it (more on that below).
Baby Camera Location: Proper Viewing Angle
The camera’s viewing angle is the second most crucial aspect to consider when deciding where to put your baby monitor. As much as feasible, you should be able to look into the crib where your baby is resting.
The camera’s field of vision may vary somewhat from one baby monitor to the next. We found that the Eufy SpaceView and the Nanit Pro had the most comprehensive coverage of your baby’s room because to their broad viewing angles.
Some models of baby monitors allow you to remotely adjust the camera’s viewing angle, which is useful when your kid gets older and starts moving about their room. If you have a wide-angle camera and want to get a good look at your kid in the crib, the zoom option will come in very helpful.
Where Should You Place Your Video Baby Monitor In The Room?
Find a spot in your baby’s room where you can set the camera at least 6 feet (1.8 metres) away from your kid while yet being near enough to get a good look at your infant. Check if the baby monitor’s microphone can pick up your child’s cries without any distortion.
To prevent any injuries, you should also pay special attention to the camera unit’s power cord. Make sure your kid can’t reach the cable by hiding it or mounting it on the wall. Keep the power cord away from your infant at all times to prevent accidental strangling.
According to our research, the following locations are ideal for installing a baby monitor:
We recommend installing it on the wall in a corner near the ceiling. It places the camera high enough that it is out of reach but yet provides a broad view of the nursery. You should also secure the power cord to the wall using a clip.
Remote pan, tilt, and zoom is very useful in baby monitors. For the newest generation of smart monitors, which follow your infant all night long, this setup may be required as well (such as the Nanit Pro and the Cubo AI).
If attaching to the wall is not an option in your child’s room, consider using a tall shelf or closet instead. If your shelf isn’t high enough to offer you a nice vantage point, try placing a few boxes beneath the camera. You may quickly adjust the camera’s position as required; this is especially helpful if your display lacks remote pan, tilt, and zoom capabilities.
Where You Should Absolutely NOT Place A Baby Monitor
No matter how cute it seems in the ads, never secure a baby monitor to a crib. Tragically, newborns have strangled themselves in the past after becoming tangled in the baby monitor’s cables.
No corded items should be placed within, on the sides, or within a child’s reach of the crib. In this article, we will discuss five potential trouble spots that may arise if you decide to put a baby monitor there.
How To Fix Or Attach A Baby Monitor To Your Wall
You can see what is included in the box for most of the baby monitors we reviewed by scrolling to the bottom of our evaluations. In the event that you did not get wall-mounting screws with your video monitor, the instructions should have stated which screws should be used.
A baby monitor may be mounted on the wall in 5 easy steps:
Before permanently mounting the baby monitor on the wall, be sure you can see and hear your child well from the spot where you want to install it.
Most baby monitors will have a helpful document showing the position of the holes that you’ll need to drill, so use it to mark the screws’ placement before you begin drilling.
Make the appropriate holes in the wall, preferably towards the ceiling.
Use the base supplied by the manufacturer and fasten it to the wall using the included screws to mount the baby monitor.
Typically, a simple clip is all that’s needed to secure the baby monitor to the base.
Baby Monitor Placement: Differences Between Newborn And Toddlers
One last thing to keep in mind when deciding where to put your baby camera is the age of your child and how you typically use their bedroom.
For a newborn, it’s best to have the camera placed as much as possible in a vertical position to their crib in order to give you a good view of your child sleeping.
Once your baby is able to sit and stand in their bed, a slightly lower angle will be best so you can see better once they are awake. It will also be better if your baby tends to play alone in their bedroom.